Hoverboards (self-balancing scooters) have one of the most significant recall histories of any consumer electronics category. Between 2016 and the present, hundreds of thousands of hoverboards have been recalled due to fire, explosion, and fall hazards. If you own a hoverboard — especially one purchased before UL 2272 certification became standard — checking its recall status is essential.
Recall Tracker monitors {{RECALL_COUNT}} recalls from {{AGENCY_COUNT}} agencies across {{COUNTRY_COUNT}} countries, including all hoverboard and self-balancing scooter recalls.
Step 1: Find the brand and model.
Look on the bottom of the hoverboard for a label with the manufacturer name and model number. Some hoverboards also print this near the charging port.
Step 2: Check for UL 2272 certification.
Look for a UL 2272 mark on the unit. This is the safety standard specifically developed for self-balancing scooters after the wave of hoverboard fires in 2015-2016. Units without this certification are significantly higher risk.
Step 3: Search by brand and model.
Go to Recall Tracker and enter your hoverboard brand and model. Review results carefully — some recalls affect specific color variants or production batches.
Step 4: Set up alerts.
Browse brands to follow your hoverboard manufacturer for automatic future recall notifications.
The single biggest reason for hoverboard recalls is lithium-ion battery pack defects. Early hoverboards used unregulated battery cells with inadequate protection circuits. When these cells overheat, they can enter thermal runaway — catching fire or exploding. Hoverboard fires have caused house fires, property damage, and serious injuries.
Many recalled hoverboards overheat while plugged in, especially when charged for extended periods. Without proper charge termination circuits, the battery can continue to draw current after reaching full charge, generating dangerous heat levels.
Some hoverboard recalls address balance calibration and speed control defects that cause unexpected acceleration, failure to balance, or sudden shutoffs while riding. These defects result in fall injuries including fractures, concussions, and road rash.
Inadequate insulation or faulty charging systems can create shock hazards, particularly in units exposed to moisture or those with damaged casings.
After the initial wave of hoverboard fires in 2015-2016, UL (Underwriters Laboratories) developed the UL 2272 standard specifically for self-balancing scooters. This standard tests the electrical system, battery, charger, and overall unit for fire, shock, and other hazards.
The CPSC now considers UL 2272 the baseline safety requirement for hoverboards sold in the United States. Hoverboards without UL 2272 certification should not be used, as they have not been tested to current safety standards.
The CPSC handles all hoverboard recalls in the United States. The CPSC has been particularly aggressive with hoverboard enforcement, issuing stop-sale orders and working with U.S. Customs to block non-compliant imports. International hoverboard recalls are tracked through agencies like UK OPSS and EU Safety Gate.
Stop using it immediately. Fire hazards can occur during use, charging, or storage.
Do not charge it. Charging is the highest-risk activity for defective hoverboards.
Store it safely. Place it on a non-flammable surface (concrete garage floor, for example) away from living areas and combustible materials.
Contact the manufacturer. Most hoverboard recalls offer a full refund. Follow the instructions in the recall notice.
Dispose properly. If a refund or return isn't available, take it to a hazardous waste facility — do not place lithium-ion battery products in regular trash.
Hoverboards with UL 2272 certification are significantly safer than the unregulated units that caused the initial wave of fires. However, recalls still occur for certified units. Always check Recall Tracker for your specific model and buy only from reputable brands with proper certification.
No. The CPSC recalled specific models and brands that failed safety testing or had reported incidents. However, the CPSC did issue a broad advisory that all hoverboards without UL 2272 certification pose an unreasonable fire risk and should not be used.
Yes. Some recalled hoverboards have caught fire while sitting idle and unplugged, though this is less common than fires during charging. Defective lithium-ion cells can enter thermal runaway at any time, which is why recalled units should be stored on non-flammable surfaces.
If it does not have UL 2272 certification, no. Pre-2016 hoverboards were manufactured before the safety standard existed and are statistically much more likely to have battery defects. Even if it hasn't been specifically recalled, the CPSC advises against using non-certified units.
Hoverboard recalls remain an active concern, and the fire hazards are severe. Search the full recalls database to check your specific model, and browse brands to set up alerts for your hoverboard manufacturer.
Start with the brand, model name, serial number, and the label on the underside of the board. On RecallTracker, you can search by maker on /brands or use the barcode and label scanner on /scan to match your hoverboard against recall notices and safety warnings. If your board has no clear brand or model, that is a red flag in this category and worth checking carefully before charging it again.
Yes. In a 2024 CPSC staff report covering 2017-2023, hoverboards were tied to 191 in-depth investigated incidents, and 167 of those involved fire hazards. The same report found 100 of the 167 fire or thermal incidents happened while the board was charging or had just finished charging, so avoid overnight charging and use only the original charger rather than a “universal” replacement.
UL 2272 is a strong safety signal, but it is not a guarantee that a hoverboard cannot overheat or catch fire. CPSC says hoverboards bought before January 29, 2016 are not UL 2272 compliant, and it also warns that UL 2272 covers the entire board, not just the battery or charger. If you are comparing models, RecallTracker Premium on /pricing is useful for saved device checks and faster alerts when a certified model later shows up in a recall or warning.
Recent examples include the March 30, 2023 recall of about 53,000 Jetson Rogue 42-volt hoverboards after multiple burn, spark, and melting reports, plus a fatal Pennsylvania house fire linked to the product. On December 21, 2023, about 25,000 Hover-1 Helix hoverboards were recalled for battery overheating, and in March 2024 CPSC warned consumers to stop using EVERCROSS EV5 hoverboards due to fire risk even though the company had not agreed to a recall. You can see how often these issues appear in the category on /statistics.
Stop using it immediately, unplug it if you can do so safely, and move away from flammable materials. Do not keep charging a board that feels unusually hot, smells like burning plastic, or only works with an aftermarket charger; CPSC says hoverboards have been involved in more than 300 fire or overheating incidents overall. After that, use /scan or /brands to check for a recall, and if your exact model is listed, follow the remedy instructions before using it again.