Your baby spends more time in their crib than anywhere else. A recalled crib — one with a structural defect, a collapsing side rail, or spacing that creates an entrapment hazard — poses a risk during the most vulnerable hours of the day. If you're wondering whether your crib or bassinet has been recalled, checking takes only a few minutes and could prevent a serious injury.
This page explains how to check your specific crib, which agency oversees crib recalls, the most common recall reasons, and what to do if your crib is affected.
Step 1: Find your model name and number.
Look for a label on the crib — typically on the inside of the headboard or footboard, under the mattress platform, or on the underside of the frame. Write down the brand name and the full model name or number.
Step 2: Note the manufacture date.
The label will include a manufacture date. Crib recalls sometimes cover only units produced within a specific date range.
Step 3: Search Recall Tracker.
Go to Recall Tracker and enter your brand name and model. Review any results and check whether your manufacture date falls within the affected range.
Step 4: Use the barcode scanner.
If you still have the original packaging, the barcode scanner at /scan can identify your crib from its UPC and check it against the recall database instantly.
Step 5: Check older cribs carefully.
Cribs purchased before June 2011 — when new federal safety standards took effect — may not meet current requirements even if they were never formally recalled. CPSC banned the sale of drop-side cribs and set new requirements for slat spacing, mattress fit, and structural integrity. If your crib predates these standards, consider replacing it regardless of recall status.
The Consumer Product Safety Commission (CPSC) handles all crib and bassinet recalls in the United States. The CPSC sets mandatory federal safety standards for cribs, investigates incidents reported through SaferProducts.gov, and coordinates recalls with manufacturers.
The current federal crib safety standard (16 CFR Part 1219 for full-size cribs and Part 1220 for non-full-size cribs) became mandatory in June 2011 and represented one of the most significant crib safety overhauls in CPSC history. It banned drop-side cribs, set mandatory structural requirements, and required third-party testing before sale.
Frame cracking, loose joints, and mattress platform failures are among the most serious crib defects. When a crib's structure fails while a baby is sleeping, the infant can fall, become trapped between components, or suffocate if the mattress shifts. Structural recalls have affected both budget and premium brands — the issue is often in manufacturing quality control rather than design.
If the spacing between crib slats is too wide, an infant can get their head, neck, or body wedged between them, creating a strangulation hazard. Federal standards require slats to be no more than 2⅜ inches apart. Some recalls address cribs with slat spacing that exceeded this limit due to manufacturing variation.
Corner posts that extend above the top of the crib rail can catch on clothing, creating a strangulation risk. Recalls have addressed cribs with corner posts or decorative elements that created these protrusion hazards.
A gap between the crib mattress and the crib wall allows an infant to become wedged, creating a suffocation hazard. Federal standards require the gap to be no more than one inch. Recalls have addressed cribs where the frame dimensions allowed mattresses to shift or where specific mattress combinations created dangerous gaps.
Loose screws, bolts, or hardware — particularly in mattress height adjustment brackets — can cause sudden structural failures. Some recalls address hardware quality issues that are not immediately visible during normal use but that fail under the weight and movement of an infant.
Drop-side cribs — those with a movable side rail that could be lowered — were banned by the CPSC following dozens of infant deaths linked to drop-side failures that created entrapment and suffocation hazards. If you have a crib with a movable side rail, stop using it immediately regardless of whether it has been formally recalled. For background on this recall history, see the crib recall guide.
Several crib brands have had significant recall actions. The DaVinci and Million Dollar Baby brands have had recalls related to mattress support hardware and structural issues — see the DaVinci crib recall guide for specifics. Dorel Juvenile Group, Graco, and Simplicity have also had major recall actions.
Bassinet recalls have involved products from Fisher-Price, Graco, and several smaller brands. The Fisher-Price Rock 'n Play Sleeper recall — while an inclined sleeper rather than a traditional bassinet — was one of the largest children's product recalls in CPSC history and illustrated the scope of risk from inclined sleep surfaces.
A crib with no recall history can still be unsafe if it is not used correctly. The American Academy of Pediatrics (AAP) and CPSC recommend:
These guidelines apply to all cribs, recalled or not. See the baby products page for related children's product safety information.
Stop using it immediately for recalls involving structural failures, entrapment hazards, or mattress fit issues. These hazards are present whenever an infant is in the crib.
Find an alternative sleep space. If you need to stop using the crib before receiving a remedy, a firm, flat play yard mattress is generally acceptable for short-term infant sleep while you arrange a replacement. Consult your pediatrician if you have questions about temporary sleep arrangements.
Contact the manufacturer. The recall notice includes manufacturer contact information and remedy instructions. Crib recalls typically offer:
Do not resell or donate the crib. A recalled crib that has not been remedied is dangerous regardless of the buyer's awareness. If the remedy requires disposal, render the crib unusable — remove slats, cut frame pieces — before discarding to prevent use by anyone who finds it.
Document the recall action. Keep a record of your contact with the manufacturer and the remedy you received. If you experienced an incident before the recall was announced, report it at SaferProducts.gov.
Secondhand cribs are common — cribs are expensive, and families often pass them along after their child outgrows them. However, a used crib carries meaningful risks:
Never use a crib with a drop-side. Drop-side cribs were banned for a reason. No repair, fix, or modification makes them safe for infant sleep.
Check current and historical recall records. Search the model against both active and archived CPSC recalls. A recalled crib that was never remedied is still dangerous.
Inspect all hardware. All screws, bolts, and brackets should be present, tight, and undamaged. Missing or substitute hardware is a serious red flag.
Verify slat spacing. Run a soda can (2⅜ inches in diameter) between all slats. If the can fits through, the spacing is too wide.
Avoid cribs over 10 years old. Older cribs may predate current safety standards and may show material degradation that is not visible on the surface.
The manufacture date is on the label inside the headboard or footboard. Cribs made before June 2011 may not meet the current mandatory federal standard — particularly if they have drop-side rails or older slat spacing. Even without a formal recall, CPSC strongly advises against using pre-2011 cribs for infant sleep.
Recall Tracker reflects all active CPSC recall notices. If your specific model is not listed, there is no known CPSC recall for that crib. However, always verify the crib meets current safety standards (manufactured after June 2011, no drop-side rail, correct slat spacing), is correctly assembled, and is used according to safe sleep guidelines.
No. Many crib defects — structural weaknesses, manufacturing variations in slat spacing, hardware that will loosen over time — are not visible during normal use. A crib that "looks fine" can fail without warning. Follow the recall notice instructions, which will specify whether use must stop immediately or can continue under specific conditions while awaiting a remedy.
Full-size cribs must meet 16 CFR Part 1219. Non-full-size cribs (including mini cribs, portable cribs, and play yards used for sleep) must meet 16 CFR Part 1220. Both standards became mandatory in June 2011. The key requirements include banning drop-sides, mandatory third-party testing, slat spacing limits, mattress fit requirements, and structural integrity testing. See the CPSC agency page for links to official standard documentation.
The American Academy of Pediatrics (AAP) publishes evidence-based safe sleep guidelines at healthychildren.org. CPSC publishes crib safety resources at cpsc.gov. For crib and baby product recall history, see the crib recall guide and the baby products recalls page.
Search all crib and bassinet recalls to verify your specific model's status, and browse baby product brands to set up automatic alerts for future recalls. For comprehensive crib recall history and safe sleep guidance, see the complete crib recall guide.
Start with the brand name, model name, and any date code or serial number printed on the mattress support, end panels, or warning label. You can search those details by brand on /brands, or use RecallTracker’s barcode scanner on /scan to pull up matching products faster. If the listing matches your exact model, stop using it until you confirm the remedy.
The most common reasons include entrapment gaps, collapsing mattress supports, broken slats, unstable hardware, and drop-side failures. Federal crib rules require slat spacing to be no more than 2 3/8 inches so a baby’s body cannot slip through. On RecallTracker’s /statistics page, you can compare how often children’s products are recalled and which hazard types appear most often.
Drop-side cribs are widely treated as unsafe because the movable side can detach or create a gap that traps a baby. Since 2011, full-size and non-full-size cribs sold in the U.S. have had to meet stronger CPSC standards that effectively ended traditional drop-side designs. If you have an older crib and cannot identify the exact model, use /scan or look it up by manufacturer on /brands before using it.
Stop using the crib immediately, even if it looks stable, because many recall hazards involve sudden collapse or hidden hardware failure. Then check the official remedy, which may be a repair kit, replacement, refund, or disposal instructions; RecallTracker Premium on /pricing can help you monitor saved products and get alerts for new recalls. Do not try a home fix unless the recall notice specifically says to install an approved repair kit.
Used cribs need extra scrutiny because they may be older than current safety standards, missing hardware, or previously recalled. Verify the manufacturer label, confirm the slat spacing and mattress fit, and search the brand on /brands before assembly; if the crib has no label or model information, that is a strong reason not to use it. For families checking multiple nursery items at once, RecallTracker Premium on /pricing is the fastest way to track ongoing recall alerts.